What are the steps involved in the spraying operation of medicinal glass bottles
2025-09-03 14:54:37
There are several processes involved in the production of medicinal glass bottles, and the spraying process for medicinal glass bottles is divided into several steps. Let's take a look at the steps involved in the spraying operation of medicinal glass bottles.
We are already very familiar with medicinal glass bottles in our daily lives, especially when we use them frequently. However, the quality of medicinal glass bottles directly affects our usage. So, how many steps do we need to take when spraying medicinal glass bottles?
Pre treatment section: The pre-treatment section for spraying medicinal glass bottles includes pre stripping, main stripping, surface adjustment, etc. If it is in the north, the temperature of the main stripping part cannot be too low and needs to be insulated. Otherwise, the processing effect is not ideal;
Preheating section: After pre-treatment, it usually takes 8-10 minutes to enter the preheating section. When the medicinal glass bottle reaches the powder spraying room, it should allow the sprayed workpiece to have residual heat to increase the adhesion of the powder foam;
Medicinal glass bottle
Medicinal glass bottle dust blowing purification section: If the process requirements of the sprayed workpiece are relatively high, this section focuses on the product. Otherwise, if there is a lot of dust adsorbed on the workpiece, there will be many particles on the surface of the processed workpiece, which will reduce the quality;
Powder spraying section: The key issue in this section is the technical skills of the powder spraying master. To create excellent quality, it is still worthwhile to spend money on hiring skilled masters.
Drying section: In this section, attention should be paid to temperature and baking time. Powder is generally best at 180-200 degrees, depending on the material of the workpiece. The distance between the drying oven and the powder spraying room should not be too far, usually 6 meters is better.
